FujiFilm FinePix Z10fd Owner's Manual page 129

Warning Displayed
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
[r CAN NOT SET DPOF]
[CAN NOT ROTATE] An attempt was made to rotate a movie or an image
shot using a camera other than FinePix Z10fd.
[r CAN NOT ROTATE]
[r CAN NOT EXECUTE] An attempt was made to transmit or save an image
or movie recorded with another device, or an image
[ CAN NOT EXECUTE] that cannot be played back, with TRIMMING FOR
BLOG.
[ CAN NOT EXECUTE]
[ CAN NOT An attempt was made to resave an image that was
EXECUTE] saved with [TRIMMING FOR BLOG].
An attempt was made to take a picture in
[ CAN NOT EXECUTE] [
LCD monitor.
The camera is not connected to a PC or printer.
[COMMUNICATION
ERROR]
• An attempt was made to send a movie or an image
shot by the camera other than FinePix Z10fd (
[CANNOT BE displayed).
TRANSMITTED] • Transmission was disconnected during IR
communication.
Explanation
AUCTION MODE] while
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
Some image formats cannot be transmitted or saved
with TRIMMING FOR BLOG.
Images saved with [TRIMMING FOR BLOG] cannot
be resaved.
Charge the battery or replace with a charged battery.
appeared in the
• Check that the USB cable is connected correctly.
• Check that your PC or printer is turned on.
• When using IR communication, make sure the
camera and the other device are transmitting and
receiving within the image transmission range.
• The image format is not transmittable.
is • A movie can not be sent.
• Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
Remedy
Continued Q
129