Installation On A Windows Pc - FujiFilm FinePix Z10fd Owner's Manual

Installation on a Windows PC

Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
requirement
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
1
Operating System *
Windows XP Home Edition
Windows XP Professional
Windows Vista
200 MHz Pentium minimum
CPU
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
RAM 128 MB minimum (512 MB minimum for Windows Vista)
Amount required for installation: 450 MB minimum
Hard disk space
Amount required for operation: 600 MB minimum
800 × 600 pixels or better, 16-bit color or better
Display
1
* Models with one of the above operating systems pre-installed.
2
* When you install the software, login using a system administrator account (e.g. "Administrator").
CAUTION
• Additional USB interface board is not guaranteed.
• Windows 95, Windows 98 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
2
*
2
*
2
*
2
*
Recommendation
Windows XP Windows Vista
2 GHz Pentium 3 GHz Pentium
4 or better 4 or better
512 MB or better 1 GB or better
2 GB or better 15 GB or better
1024 × 768 pixels or better,
Highest (32 bit)
Continued Q
111 111