Mounting The Switch In A Standard 19" Rack; Power On; Power Failure - D-Link DGS-3620-28SC-EI Hardware Installation Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide

Mounting the Switch in a Standard 19" Rack

Power On

1. Plug one end of the AC power cord into the power connector of the Switch and the other end into the local
power source outlet.
2. Once the system is powered on, the LED's blink green to indicate that the system is resetting.

Power Failure

In the event of a power failure, just as a precaution, unplug the Switch. After the power returns, plug the switch back in
to the power socket.
Figure 2–3 Mount the switch in a rack
25