Electrical Requirements; Troubleshooting Problems - KitchenAid KSM7581MS Instructions Manual

Volts: 120 A.C. only. Hertz: 60
The power rating for your Stand Mixer is
printed on the trim brand or on the serial
plate.
Model KSM7990 Only:
Volts 120
Horsepower 1.3
Hertz 60
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or serviceman
install an outlet near the appliance.
Please read the following before
calling your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the Stand Mixer. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See "Beater to
Bowl Clearance".

Electrical Requirements

Troubleshooting Problems

If your Stand Mixer should
malfunction or fail to operate,
please check the following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
- Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the
mixer still does not start, allow it to
cool for 30 minutes before turning it
back on.
If the problem is not due to one of the
above items, see the KitchenAid
Warranty. Do not return the Stand Mixer
to the retailer, as they do not provide
service.
®
7