Attaching The Lens Cap And Camera Strap - FujiFilm FinePix S7000 Owner's Manual
Fujifilm owner's manual digital camera finepix s7000
Hide thumbs
Also See for FinePix S7000:
- Quick start manual (135 pages) ,
- Owner's manual (61 pages) ,
- Brochure & specs (5 pages)
Table of Contents
Advertisement
1
ATTACHING THE LENS CAP AND CAMERA STRAP
Getting Ready
When attaching the strap to the camera, attach the metal strap clip to the camera before threading
the strap through the clip. This description explains how to attach the strap using the clip attaching
tool provided to make attaching the metal strap clip easier.
1
8
(Numbers
to
refer to the illustrations.)
1
Clip attaching tool
Gap
Metal strap clip
2
3
1
0
2
0
4
Notch
10
Checking that the metal strap clip is facing the right
way, slide the clip fully into the clip attaching tool
and open up the gap in the strap clip.
G
!
Keep the clip attaching tool in a safe place as you will also
need it for removing the metal strap clip from the camera.
Hook the open metal strap clip through the strap
mount on the camera.
1 Once the clip is securely hooked through the
strap mount, hold the clip in place as you
remove the clip attaching tool.
2 Turn the metal strap clip around once until it
clicks closed and is fully threaded onto the strap
mount.
Face the black side of the cover towards the
camera and attach the strap by threading the strap
through the strap clip, starting from the notched
side.
1
4
Repeat steps
to
to attach the other end of the
strap.
5
1
0
2
0
6
Fastener
Fastener
lens cap holder
7
8
N
N
Using the lens cap holder
1 Attach the lens cap cord by threading it through
the metal strap clip near the terminal cover.
2 Attach the lens cap by pressing in on each side
of the cap.
G
!
Attach the lens cap cord to the camera to avoid losing the
lens cap.
Remove fasteners A and B from only one side of
the shoulder strap. Then pass the shoulder strap
through the lens cap holder and then back through
fasteners A and B.
Thread the strap through the protective cover and
metal strap clip.
Thread the strap through the buckle and retainer.
7
8
Repeat steps
to
to attach the other end of the
strap.
To ensure that the lens cap does not appear in your
shot when you take a picture, attach it to the lens cap
holder.
11
Hide quick links:
Advertisement
Table of Contents
