System Setup; Overview; Entering System Setup - Alienware X51 R2 Owner's Manual

System Setup

Overview

Use the system setup to:
•
get information about the hardware installed in your computer, such as the amount
of RAM, the size of the hard drive, and so on
•
change the system configuration information
•
set or change a user-selectable option, such as user password, type of hard drive
installed, enabling or disabling base devices, and so on
CAUTION:
the settings for this program. Certain changes can make your
computer work incorrectly.
NOTE:
Before you change system setup, it is recommended that you note the
system-setup screen information for future reference.

Entering System Setup

1 Turn on (or restart) your computer.
2 During POST, when the Alienware logo is displayed, watch for the F2 prompt to
appear and then press <F2> immediately.
NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt
can appear very quickly, so you must watch for it, and then press <F2>. If you
press <F2> before the F2 prompt, this keystroke is lost. If you wait too long and
the operating system logo appears, continue to wait until you see the Microsoft
Windows desktop. Then, turn off your computer and try again. See "Turn Off Your
Computer and Connected Devices" on page 7.
System Setup Screens
The system setup screen displays current or changeable configuration information for
your computer. Information on the screen is divided into three areas: the Setup Item,
active Help Screen, and Key Functions.
10
| System Setup
Unless you are an expert computer user, do not change