Table of Contents
Advertisement
4.1.2.
ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
To.update.the.BIOS.using.EZ.Flash.2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
•
Press <Alt> + <F2> during POST.
•
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash
2 and press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
2.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS
update process and automatically reboots the system when done.
•
Only a USB flash disk with FAT 32/16 format and single partition can
support the ASUS EZ Flash 2 utility.
•
Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS P6-P5G41E
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
MXIC 25L8005
Current ROM
P6-P5G41E
0202
(H:01 B:07)
12/15/2009
A:\
[Enter] Select or Load
[Up/Down/Home/End] Move
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Tab] Switch
[V] Drive Info
[B] Backup
[Esc] Exit
4-5
Hide quick links:
Advertisement
Table of Contents
