Download  Print this page

Sata1~4 - Asus P6-P5G41E User Manual

Desktop barebone.
Hide thumbs

Advertisement

4.3.3.

SATA1~4

While entering Setup, the BIOS automatically detects the presence of SATA
devices. There is a separate sub-menu for each SATA device. Select a device item
then press <Enter> to display the SATA device information.
Main
Advanced
SATA 1
Device
: Not Detected
LBA/Large Mode
Block(Multi-Sector Transfer) M
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device,
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and
SMART monitoring). These values are not user-configurable. These items show
N/A if no SATA device is installed in the system.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO.Mode.[Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA.Mode.[Auto]
Selects the DMA mode. Configuration options: [Auto]
ASUS P6-P5G41E
BIOS SETUP UTILITY
Power
Boot
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Tools
Exit
Disabled: Disables LBA
Select the type
Mode.
of device connected
Auto: Enables LBA
to the system
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.
Enter Go to Sub-screen
F1
F10
ESC
Select Screen
Select Item
General Help
Save and Exit
Exit
4-11

Advertisement

Table of Contents

   Related Manuals for Asus P6-P5G41E

Comments to this Manuals

Symbols: 0
Latest comments: