Apm Configuration - Asus P6-P5G41E User Manual

4.5.4 APM Configuration
APM Configuration
Restore on AC Power Loss
Resume On Ring
Resume On By PCIE Device
Power On By USB HID
Resume On By RTC Alarm
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Resume.On.Ring.[Disabled]
Enables or disables ring to generate a wake event. Configuration options:
[Disabled] [Enabled]
Resume.On.By.PCIE.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI Express card. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power.On.By.USB.HID.[Disabled]
Allows you to enable or disable USB HID wake up function. Configuration options:
[Disabled] [Enabled]
Resume.On.By.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
4-22
[Power Off]
[Disabled]
[Disabled]
[Disabled]
<Enter> to select
whether or not to
restart the system
after AC power loss.
Chapter 4: BIOS setup