Connecting The Computer; Connect Your Mouse And Keyboard; Ps/2 Interface; Usb Interface - Acer Predator G5920 User Manual

Generic user guide

Table of Contents

Connecting the computer

Setting up your computer is easy. For the most part, you only have four things to

connect: the mouse, the keyboard, the monitor, and the power cable.

Note: The peripherals shown in the connections below are for your reference

only. Actual device models may vary in select countries.

Plug the PS/2 mouse and keyboard cable into the PS/2 keyboard port (purple port)

and mouse port (green port) located on the rear panel of your computer.

You can also plug a USB mouse or a USB keyboard cable into any of the USB ports

located on the front and rear panels of your computer.

To connect a monitor, simply plug the monitor cable into the DVI port located on

the rear panel of your computer. If you have a monitor that supports S-video, plug

the monitor cable to the S-video port located on the rear panel of your computer.

Note: Refer to the monitor manual for additional instructions and information.

Connect one end of the network cable on the network port on the rear of the

computer, then connect the other end of the network cable into the cable modem

or network jack or hub on your network.

Note: Consult your network system administrator or operating system manual

for information on how to configure your network setup.

3 Setting up your computer

Table of Contents

Show Quick Links

Table of Contents

Predator g series