Installation; Final Preparation; Performance Checklist - Viking RVEC3305B Installation Manual

Installation

1
Lower cooktop into cutout. Connect the red and black leads from the unit conduit
3
Cooktop
Countertop
Filler
Block
Screw
Bracket
After placing cooktop in the cutout, screw brackets to
burner box with sheet metal screw. (Six bracket
assemblies included - 2 per side, 1 front, 1 rear)
Note: It is recommended to use a filler block between
prevent any damage to the countertop. Failure to do
so may result in cracking or splitting of the countertop.
12
2
Green
Neutral
Red
Black
to the corresponding leads in the junction box.
4
Cooktop
Countertop
Filler
Block
Eye Bolt
Bracket
Screw sheet metal screws into brackets
and tighten firmly against bottom of countertop.
the bolt and the underside of the countertop to

Final Preparation

• Some stainless steel parts may have a If it is necessary to scrape stainless steel to
plastic protective wrap which must be remove encrusted materials, soak with hot,
peeled off. wet cloths to loosen the material, then use a
• All stainless steel body parts should be wood or nylon scraper.
wiped with hot, soapy water and with a DO NOT use a metal knife, spatula, or any
liquid cleaner designed for this material. other metal tool to scrape stainless steel!
If buildup occurs, DO NOT use steel wool, Scratches are almost impossible
abrasive cloths, cleaners, or powders! to remove.

Performance Checklist

A qualified installer should carry out the
Any adjustments necessary that are a result of
following checks: the installer not following instructions will be
the responsibility of the installer, dealer of the
I I
Check top surface elements end user of this product.
1. Check top surface elements – glow red
when turned on.
2. Check hot surface indicator lights – glow
red when corresponding element is hot.
13