Installation; Optional Gasket Installation; Gas & Electrical Connection; Vgsu Bracket Installation - Viking VGSU104 Installation Manual

Installation

1
Remove the grates and burner caps.
packaged foam top.
3
Optional Gasket
Peel away the plastic covering and place the gasket
material all the way around the burner flange.
IMPORTANT: Make sure the corners are covered
completely, leaving no air gaps.
Gas & Electrical Connection
1
Note: Refer to
"Electrical & Gas
Requirements"
section for
proper
installation
information.
20
2
Optional Gasket
Turn the cooktop upside down and place on the
ote: Make sure there are no loose
objects on the cooktop before turning upside down.
4
Turn the cooktop oven and place into countertop
opening.

VGSU Bracket Installation

1
Countertop
Cooktop
Screw
Bracket
Screw hold down brackets using the #10 x 1/2" sheet
metal screw to the burner box.

DGSU/DGCU Bracket Installation

1
Countertop
Cooktop
Bracket
Place a bracket in the slots and lower
until the bracket catches.
Final Installation
1
Replace the burner caps and grates.
ote: The narrow edge of grate goes toward center of unit.
21
2
Countertop
Cooktop
Bracket
Eye Bolt
Screw the eye bolt into the self-retaining nut and
tighten firmly against bottom of countertop.
2
Countertop
Cooktop
Bracket
Use the bolt to tighten the cooktop to the countertop.
ote: There must be a 1" (2.5 cm) clearance under
counter on all four sides of cooktop.