Setting For Digital Output (Digital Output) - Pioneer AVH-P7480DVD Owner's Manual

Setting for Digital Output (DIGITAL OUTPUT)

Set digital output correctly to match the components you are using with this unit. There is no
need to change settings if this unit is not connected for digital output.
With this system, select the "LPCM" setting.
Precaution:
• Incorrect setting may result in noise and damage to speakers.
1. Move the joystick up/down to select
the "DIGITAL OUTPUT" in the second
SET UP MENU.
"DIGITAL OUTPUT" is indicated in blue. (For
details, see page 105.)
2. Click the joystick.
Digital output setting menu is displayed.
3. Move the joystick up/down to select the
desired digital output setting.
The currently set digital output setting is indicated
the mark " ". The digital output setting selected
with the joystick is indicated in blue.
Digital output
Dolby D/LPCM
LPCM
4. Click the joystick.
The selected digital output setting is set.
Note:
• Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio
is not output.
• Pressing the RETURN button takes you back to the previous display.
Setting detail
Select when using a Dolby Digital compatible amp and decoder. The
Dolby Digital signal is output as it is. (Initial setting)
Select when using an amp and decoder that are not Dolby Digital
compatible. The Dolby Digital signal is converted to and output as a
linear PCM signal.
VD
116