Installation On A Mac Os X - FujiFilm FinePix FinePix Z200fd Owner's Manual

Installation on a Mac OS X

Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
1
Compatible Mac
*
Operating System
RAM
Hard disk space
Display
Other
1
* PowerPC, Intel processor loaded
2
* Models with a USB port as a standard feature
3
* Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
120
Power Macintosh G3 2 , PowerBook G3
*
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, Mac mini, or Mac Pro
Mac OS X (compatible with version 10.3.9 to 10.4.11)
256 MB minimum
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
800 × 600 pixels or better, at least 32,000 colors
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix
Internet Service; Internet connection and e-mail software required to use e-mail
3
option*
2 ,
*