FujiFilm FinePix FinePix Z200fd Owner's Manual page 150

Fujifilm digital camera owner's manual
Hide thumbs Also See for FinePix FinePix Z200fd:
Table of Contents

Advertisement

Specifications
Battery NP-45
Nominal voltage
Nominal capacity
Operating temperature 0°C to +40°C (+32°F to +104°F)
Dimensions
Mass (Weight)
Battery Charger BC-45
Rated input
Input capacity
Rated output
Applicable batteries
Charging time
Dimensions
Mass (Weight)
Operating
temperatures
150
DC 3.7V
740 mAh
31 mm × 39.4 mm × 5.7 mm(1.2 in. ×
1.6 in. × 0.2 in.)(W × H × D)
Approx. 15 g (1.0 oz.)
100-240 V AC, 50/60 Hz
9.0 VA
4.2 V DC, 550 mA
Rechargeable Battery NP-45
Approx. 180 minutes
91 mm × 46 mm × 21 mm(3.6 in. ×
1.8 in. × 0.8 in.) (L × W × D)
Approx. 55 g (1.9 oz.) (excluding
batteries)
0°C to + 40°C(+ 32°F to + 104°F)
Notes on Using the Battery Charger
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-45.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
• Do not use the connecting cable for the battery charger
with any other device.

Advertisement

Table of Contents
loading

Table of Contents