FujiFilm FinePix FinePix Z200fd Owner's Manual page 31

Flash
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
Change the flash mode when you want to take pictures without
flash. See p.60 for information on flash.
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.37).
• When selecting a slow shutter speed that will cause
camera shake, appears on the LCD monitor. Use
flash or a tripod.
• See p.133-137 for information on Warning displays.
See "Troubleshooting" (➝p.138-145) for more
information.
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the shutter
button, etc. The indicator lamp shows the camera status.
Display
Lit green Locking the focus
Blinking green Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and Recording to Memory Card or internal
orange alternately memory (ready to shoot)
Lit orange Recording to Memory Card or internal
memory (not ready)
Blinking orange Charging flash (flash will not fire)
Blinking red • Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.133-137).
Indicator lamp
Status
31