Battery Installation; Getting Started - VTech Jake And The Neverland Pirates Smart Ship Learn & Go User Manual

Unlock the packaging locks:

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the unit.
3. Open the battery cover.
4. Install 2 new "AA" Size (AM-3/LR6) batteries
following the diagram inside the battery box. (The
use of new alkaline batteries is recommended for
maximum performance.)
5. Replace the battery cover.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Rotate the packaging lock counter-clockwise for
90 degrees
Pull out the packaging lock
4