Adjusting Air Pressure; Loading Nails - Hitachi NT65M2 - to 2-1 16 Gauge Finish Nailer Instruction And Safety Manual

English

ADJUSTING AIR PRESSURE

Adjust the air pressure at recommended operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 –
2
8.5 kgf/cm ) according to the length of nails and the hardness of workpiece.
The correct air pressure is the lowest pressure which will do the job. Using the Nailer at a
higher than required air pressure unnecessarily over stresses the Nailer.

LOADING NAILS

● When loading nails into Nailer,
1) do not pull trigger;
2) do not depress push lever; and
3) keep Nailer pointed downward.
(1) Pull the nail feeder back.
(2) Pull the nail feeder until the concave portion of the magazine cover clicks.
16
Magazine cover
WARNING
● Do not exceed 120 psi
(8.3 bar 8.5 kgf/cm
WARNING
Nail feeder
Concave portion
Nail feeder
2
).