FujiFilm FinePix F50fd Owner's Manual page 84

[p-MODE MENU] (Playback)
C Point the camera's infrared port towards the front of the
camera's infrared port (➝p.11). Transmission distance
is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.
D Press p to begin transmission.
When transmission is completed,
[TRANSMISSION COMPLETED] will
appear on the LCD monitor.
84
(Angle: up to approx. 15°)
IR COMMUNICATION IR COMMUNICATION
CONNECTING CONNECTING
CANCEL CANCEL
CAUTION
• Check that your camera is turned on when transmitting
the image data.
• If the image is 3:2 ratio, white lines may appear at the
top and bottom or right and left of the print, depending
on the printer type.
• Movie images cannot be printed.
• Images photographed with a camera
FinePix F50fd may not be printed or transmitted.
• If the [QUALITY] of sending image data is over 3,
[QUALITY] of the image will be set to 3.
CHECK
• You can send the image data by simply pressing p
three times.
• Refer to the manual provided with the receiving device
for more information.
Receiving the image data
Receiving the image data from a FUJIFILM digital camera
is shown as an example here. You can receive data from
another device in the same way.
IR COMMUNICATION IR COMMUNICATION
TRANSMIT TRANSMIT
CANCEL CANCEL
A Turn the camera on.
B Press p or q to select the sending frame
(file).
Setting the menu (➝p.82)
other than
RECEIVE RECEIVE