Changing The Finepix Color Setting ([ Finepix Color]) - FujiFilm FinePix F50fd Owner's Manual

[p-MODE MENU] (Photography)
Area shot and quality setting
Area shot excluding %
12 12/ 31 31/ 2050 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM 2050 10 10: 00 00 AM AM AM
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.154). The numbers
to the right of setting show the number of available
frames.
• Available [SISO] setting changes depending on quality
setting. Refer to "Correlation of sensitivity, quality and
Photography modes" (➝p.72).
74
Area shot with %
AUTO AUTO
ISO ISO ISO ISO
AUTO(400) AUTO AUTO(400) AUTO (400) (400)
12 12/ 31 31/ 2050 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM 2050 10 10: 00 00 AM
Use this menu to specify required color tone. It is effective
for taking vivid shots or black and white shots.
ISO ISO ISO ISO
AUTO(400) AUTO AUTO(400) AUTO (400) (400)
CHECK
AM AM
CAUTION
When the Mode dial is set to
appear on the LCD monitor.
MEMO
• The [FinePix COLOR] setting is retained even when the
• [p-CHROME] may have little visible effect with some
Changing the FinePix COLOR
setting ([ FinePix COLOR])
FinePix COLOR settings
The contrast and color saturation
[STD]
are set to standard. Use this mode
[p-STANDARD]
for normal photography.
The contrast and color saturation
are set to high. This mode is
effective for taking more vivid shots
[p-CHROME]
of subjects such as scenery (blue
sky and greenery) and flowers.
This mode converts the colors in
the photographed image to black
[p-B&W]
and white.
When setting [p-CHROME] or [p-B&W], the icon
appears on the LCD monitor.
camera is off or the mode setting is changed.
subjects or the scene being shot. You may not be able
to see any difference on the LCD monitor.
➝
Setting the menu ( p.68)
or , does not