Table 3. Configuration Errors
Configuration Error
Configuration Mismatch
Table 4. Wiring Errors
Wiring Error
Wiring Mismatch
Missing Link
Partial Link
Table 5. Undiscovered Switch Error
Undiscovered Switch Error
Recommended Action
1. On the Deployment and Validation Status screen, select the switch that you
want to view.
2. Click the View Mismatch button.
3. Review the configuration mismatch and correct the configuration errors.
4. Restart validation of the switch from the Deploy and Validate Core screen by
selecting the switch from the list and clicking the Start Validation button.
Recommended Action
1. Review the wiring plan.
2. Wire the switch according to the wiring plan to fix the wiring mismatch.
3. Validate the switch from the Deploy and Validate Core screen by selecting
the switch from the list and clicking on the Start Validation button.
1. Review the wiring plan.
2. Wire the switch according to the wiring plan to fix the missing link.
3. Validate the switch from the Core Deployment > Deploy > Deploy and
Validate Core screen by selecting the switch from the list and then clicking
the Start Validation button.
1. Verify that the switch is wired according to the wiring plan.
2. Verify the connectivity on the DFM from both of switches of the link.
3. Validate the switch from the Core Deployment > Deploy > Deploy and
Validate Core screen by selecting the switch from the list and then clicking
the Start Validation button.
Recommended Action:
45