Set Frame No. Memory; Software Installation; The Software Components - FujiFilm FinePix F410 Owner's Manual

SET FRAME NO. MEMORY

SET – UP
CONT. RENEW
A A
B B
Formatted xD-Picture Card used for both A and B.
Setting this function to "CONT." makes file
management easier as it ensures that file names are
not duplicated when images are downloaded to a
PC.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD -
Picture Card used.
RENEW: Pictures are stored on each xD - Picture
Card beginning with a file number "0001".
G
!
If the xD - Picture Card already contains image files
with file numbers higher than the highest file number
on the last xD - Picture Card, images are stored
beginning from the highest file number on the current
86
xD - Picture Card.
１００−９９９９ １００−９９９９
Directory number
File number
Frame number
Frame number Frame number
７／２０／２００３ ７／２０／２００３
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in
the top right corner of the screen are the file
numbers, while the first 3 digits show the
directory number.
G
!
When you change the xD - Picture Card, always
switch the camera off before you open the battery
cover. If you open the battery cover without
switching the camera off, the Frame No. Memory will
not function.
G
!
File numbers run from 0001 to 9999. Once 9999 is
exceeded, the directory number changes from 100 to
101. The maximum number is 999 – 9999.
G
!
If the " " message appears, see P.120.
G
!
The displayed frame number may differ for images
photographed on other cameras.
5 Software

THE SOFTWARE COMPONENTS

Installation
USB Mass Storage
Driver
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Connect the camera
with " • " selected
as the USB setting
(➡P.101).
Exif Launcher
Launches the FinePixViewer
software when a camera is
connected.
Connect the camera
with " q PC" selected
as the USB setting.
USB PC Camera
Driver
Allows a digital camera to be
used as a PC Camera.
✽ Note that the software configuration differs slightly depending on your operating system.
FinePixViewer
Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
PictureHello
✽ Windows only
Used for videoconferencing.
ImageMixer VCD
for FinePix
Creates a FinePix CD Album.
RAW FILE CONVERTER LE
Used when you open RAW files that were photographed on
cameras that support the RAW file format.
✽ Macintosh only
Acrobat Reader R R
Software used to read PDF-format documents on a personal
computer. This software is needed to read the User's Guides for
FinePixViewer.
QuickTime
Software needed for playing back movies, etc.
5 5
87