What You Need To Know; Recovering Using Hp Recovery Partition (Select Models Only) - HP Pavilion dm1-4200 Getting Started Manual

Getting started hp notebook
Hide thumbs Also See for Pavilion dm1-4200:
Table of Contents

Advertisement

What you need to know

HP Recovery Manager recovers only software that was installed at the factory. For software not
provided with this computer, you must either download the software from the manufacturer's
website or reinstall the software from the disc provided by the manufacturer.
A system recovery should be used as a final attempt to correct computer issues. If you have not
already tried restore points (see
partial restores (see
Manager to recover your system.
A system recovery must be performed if the computer hard drive fails or if all attempts to correct
any functional computer issues fail.
If the recovery media do not work, you can obtain recovery discs for your system from the HP
website.
The Minimized Image Recovery option is recommended for advanced users only. All hardware-
related drivers and software are re-installed, but other software applications are not. Do not
interrupt the process until it is complete, otherwise the recovery will fail.

Recovering using HP Recovery partition (select models only)

The HP Recovery partition (select models only), allows you to restore your system without the need
for recovery discs or a recovery flash drive. This type of recovery can only be used if the hard drive is
still working.
To check for the presence of a recovery partition, select Start, right-click Computer then select
Manage > Disk Management. If the recovery partition is present, a Recovery drive is listed in the
window.
NOTE:
Recovery discs have been included if your computer did not ship with a recovery partition.
1.
Access HP Recovery Manager in either of the following ways:
Select Start and type recovery in the search field. Select Recovery Manager from the
list.
– or –
Turn on or restart the computer, and then press
Startup Menu" message is displayed at the bottom of the screen. Then press
"F11 (System Recovery)" message is displayed on the screen.
2.
Click System Recovery in the HP Recovery Manager window.
3.
Follow the on-screen instructions.
34
Chapter 6 Backing up, restoring, and recovering
Restoring to a previous system restore point on page
Restoring specific files on page
33), try them before using HP Recovery
esc
while the "Press the ESC key for
33) and
f11
while the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents