Memory Modules - HP Mini CQ10-900 User Manual

9

Memory modules

The computer has one memory module compartment. The capacity of the computer can be upgraded
by upgrading the existing memory module in the memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To replace the memory module:
CAUTION:
Shut down the computer before replacing the memory module. Do not remove the memory module
while the computer is on, in the Suspend state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet and remove the battery (see
on page
4. Remove the service door (see
5. Remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
46 Chapter 9 Memory modules
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
32).
Replacing or upgrading the hard drive on page
Removing the battery
38).