Table of Contents
Advertisement
4.
Click the check box next to Dim display when idle.
5.
Click Close.
Managing low battery levels
The information in this section describes the alerts and system responses set at the factory. Some
low-battery alerts and system responses can be changed using Power Management in Control
Center. Preferences set using Power Management do not affect lights.
Identifying low battery levels
When a battery that is the sole power source for the computer reaches a low or critical battery level,
the following behavior occurs:
●
If Hibernation is enabled and the computer is on or in Suspend, the computer initiates
Hibernation.
●
If Hibernation is disabled and the computer is on or in Suspend, the computer remains briefly in
Suspend, and then shuts down and loses any unsaved information.
Resolving a low battery level
Resolving a low battery level when external power is available
▲
Connect one of the following devices:
●
AC adapter
●
Optional docking or expansion device
●
Optional power adapter purchased as an accessory from HP
Resolving a low battery level when a charged battery is available
1.
Turn off the computer or initiate Hibernation.
2.
Replace the discharged battery with a charged battery.
3.
Turn on the computer.
Resolving a low battery level when no power source is available
●
Initiate Hibernation.
●
Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Hibernation
When the computer lacks sufficient power to exit Hibernation, follow these steps:
1.
Replace the discharged battery with a charged battery, or connect the AC adapter to the
computer and to external power.
2.
Exit Hibernation by briefly pressing the power button.
Conserving battery power
●
Turn off wireless and local area network (LAN) connections and exit modem applications when
you are not using them.
●
Disconnect unused external devices that are not plugged into an external power source.
Using battery power
31
Advertisement
Table of Contents
