Setting Set-Up Mode - FujiFilm FinePix 40i Owner's Manual

6
SET-UP MODE
Setting
Item Display Factory Default
END
SET [OK]
AUTO POWER
YES/NO YES
OFF
BEEP HIGH/LOW/OFF HIGH
DATE/TIME
SET [OK]
FRAME NO. RENEW/CONT RENEW
88 88
e
The table below explains the camera setting
Details
Confirms the settings and exits setup.
Use this setting to specify whether the camera
automatically switches off if it is left unused for 2
minutes. Note that the Auto Power Off function does
not operate during Auto Play or when a USB
connection is being used.
Selects the volume of the beep sound emitted when
camera controls are used.
Allows you to set the date and time. See P.19 for
details.
Selects whether the frame number memory function is
used. See P.90 for details.
G G G
➀ ➁ ➃
1
G
➂
➀
Set the Mode dial to " ".
0
➁
If you press the "MENU/OK" button, the menu
screen will appear on the LCD monitor.
➂
Use " " or " " to select "MODE" and then
d c
use " a ( )" or " b ( )" to select "SET-UP".
➃
Press the "MENU/OK" button.
G G
➀ ➁
2
➀
Use " a ( )" or " b ( )" to select the item.
➁
Then use " d " or " c " to change the setting.
G
!
Press the "MENU/OK" button to select "Set Date/
Time". See P.19 for details.
6
89 89