Number Of Available Frames; Using Af/Ae Lock - FujiFilm FinePix 40i Owner's Manual

TAKING PICTURES (AUTO MODE)

Number of Available Frames

I
Standard number of shots per SmartMedia
The number of shots that can be recorded onto a SmartMedia card varies slightly depending on the type of subject.
Also, the difference between the standard number of shots and the actual number of available shots increases for
SmartMedia with a higher capacity.
File Size
Quality Mode
FINE
Approx.
Image Data Size
1700KB
MG-4S (4MB) 2
MG-8S (8MB) 4
9
MG-16S/SW (16MB)
18
MG-32S/SW (32MB)
MG-64S/SW (64MB) 36
26
The number of available shots is displayed on
the LCD monitor in the position shown in the
figure at left.
G
!
See P.41 for information on changing the File size
and Quality setting.
G
! At shipment, the default settings are 2400 × 1800
(for File Size) and NORMAL (for Quality).
2400 × 1800 1280 × 960
NORMAL BASIC FINE NORMAL
Approx. Approx. Approx. Approx.
803KB 328KB 612KB 312KB
4 11 6 12
9 23 12 24
19 47 25 49
38 94 50 99
77 189 101 198
✽The numbers of available shots are shown for formatted SmartMedia.

USING AF/AE LOCK

1
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
G
640 × 480
!
The displayed screens are those shown on the LCD
monitor.
NORMAL
G
!
See P.21 for information on taking pictures using the
Approx.
LCD monitor.
87KB
N
44
AF (AUTOFOCUS) /AE (AUTOEXPOSURE) LOCK
89
On the FinePix40i, pressing the shutter button down half way locks the focus and exposure
165
settings (AF and AE lock). If you want to focus on a subject that is not centered in the frame or
331
change the picture composition after the exposure is set, you can obtain good results by changing
663
the composition after the AF and AE settings are locked.
2
Move the camera slightly so that one of the
subjects in the AF frame.
N
2
27