Chapter 6 Ntp Server; Configuring An Ntp Server; Figure 72 Configuring Ntp Server - Dell PowerConnect W-IAP3WN User Manual

For successful and proper communication between various elements in a network, time synchronization between
the elements and across the network is critical. Following are the uses of time synchronization:
Trace and track security gaps, network usage, and troubleshoot network issues.

Map event on one network element to a corresponding event on another.

Maintain accurate time for billing services and similar.

Network Time Protocol (NTP) is required to obtain the precise time from a server and to regulate the local time
in each network element. If NTP server is not configured in the Dell Instant network, an IAP reboot may lead to
variation in time and data.

Configuring an NTP Server

The NTP server is set to pool.ntp.org by default. To configure the NTP server on Dell Instant, perform the
following steps.
1. Navigate to the Settings tab in the top right corner of the Instant UI.
2. In the General tab, enter the IP address or the URL (domain name) of the NTP server in the NTP Server text
box and click OK.
3. Select the timezone from the Timezone drop-down list. This indicates the time returned by the NTP server.
Figure 72
Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide
Configuring NTP Server
Chapter 6
NTP Server
NTP Server | 89