Automatic; Figure 71 Upgrading Single Class Or Multi-Class Ap Networks - Dell PowerConnect W-IAP3WN User Manual

Figure 71
Image file— Select to directly upload an image file. This method is only available for single-class IAPs.

Example: DellInstant_Orion_6.1.3.1-3.0.0.0_33353
Example: DellInstant_Cassiopeia_6.1.3.1-3.0.0.0_33353

Automatic

1. Click Check for New Version to automatically check for images on the Dell image server in the cloud.
The field is replaced with the Image Check in Progress message. After the image check is completed, one of the
following messages will appear:
No new version available— If there is no new version available.

Image server timed out— Connection or session between the image server and the IAP is timed out.

Image server failure— If the image server does not respond.

A new image version found— If a new image version is found.

2. If a new version is found, the Upgrade Now button becomes available and displays the version number.
3. Click Upgrade Now.
The IAP downloads the image from the server, saves it to flash and reboots. Depending on the progress and
success of the upgrade, one of the following messages will be displayed:
Upgrading— While image upgrading is in progress.

Upgrade successful— When the upgrading is successful.

Upgrade fail— When the upgrading fails.

Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide
Upgrading single class or multi-class AP Networks
Managing IAPs | 87