Figure 16 Maintenance Link - Default View - Dell PowerConnect W-IAP3WN User Manual

Backup Configuration— Use this feature to create local Instant configuration backup. Click Backup

Configuration to save the configuration file named instant.cfg.
Restore Configuration— Click Restore Configuration to browse and locate the backup file to restore.

Reboot the IAP for the changes to take effect.
Certificates — Displays information about the current certificate installed in the network. Provides an

interface to upload new certificates and to set a passphrase for the certificates. For more information, see
"Certificates" on page
Firmware — Displays the current firmware version and provides options to upgrade to a new firmware version.

For more information,
Reboot — Displays the IAPs in the network and provides an option to reboot the required access point or all

access points. For more information, see
Convert — Provides an option to change the network from a Virtual Controller managed network to a Dell

Mobility Controller managed network. For more information, see
Managed Network to Mobility Controller Managed Network" on
Figure 16
30 | Instant User Interface
111.
see"Upgrading to New Version" on
Maintenance Link — Default View
page 86.
"Rebooting the IAP" on
Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide
page 83.
"Migrating from a Virtual Controller
page 79.