Table 6 Conditions For Adding An Employee Network- Security Tab - Dell PowerConnect W-IAP3WN User Manual

Instant access point 6.1.3.1-3.0.0.0
Hide thumbs Also See for PowerConnect W-IAP3WN:
Table of Contents

Advertisement

Table 6
If
You select the Open security level
50 | Wireless Network
Conditions for Adding an Employee Network— Security Tab
then,
1. Select the required MAC authentication from the MAC authentication drop-
down list. Available options are— Enabled and Disabled
When Enabled, user must configure at least one RADIUS server for
authentication server. See
details.
2. Authentication server 1— Select the required Authentication server option
from the drop-down list. Available options are:
New— If you select this option, an external radius server has to be configured
to authenticate the users. For information on configuring an external RADIUS
server, see
Chapter 8, "Authentication"
InternalServer— If you select this option, users who are required to
authenticate with the internal RADIUS server must be added. Click the Users
link to add the users.
For information on adding a user, see
3. Reauth interval— When set to a value greater than zero, the Access Points will
periodically reauthenticate all associated and authenticated clients.
4. Blacklisting— Select Enabled if you want clients to be blacklisted after a
certain number of authentication failures.
5. Max authentication failures— Users who fail to authenticate the number of
times specified here will be dynamically blacklisted. The maximum value for
this entry is 10.
NOTE: Navigate to PEF > Blacklisting in the WebUI to specify the duration of the
blacklisting on the Blacklisting tab of the PEF window.
6. For Internal users— Click Users to populate the system's internal
authentication server with users. For information about adding a user, see
"Adding a User" on page
7. Click Upload Certificate and browse to upload a certificate file for the internal
server. See
"Certificates" on page 111
Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide
"MAC Authentication" on page 109
.
"Adding a User" on page
203.
for more information.
for further
203.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-iap92Powerconnect w-series

Table of Contents