Dell PowerConnect W-IAP175P Installation Manual page 6

Table 3 W-IAP175P LED Status Indicators (Continued)
LED
RSSI (Radio 0)
RSSI (Radio 1)
W-IAP175AC LED Status Indicators
The W-IAP175 include visual indicators for power, link, heat and radio status. Additionally, each radio has a four-
LED array that indicates received signal strength (RSSI).
NOTE: The RSSI LED indicators represent varying degrees in the RSSI level. The absence of a signal is indicated by no LED
response, and full signal strength is indicated when all four LEDs are active and lit.
Figure 3 LED Layout
Table 4 lists the meanings of the LEDs on the W-IAP175AC outdoor access points.
Table 4 W-IAP175AC LED Status Indicators
LED
P/S
6
Function
RSSI Level for Radio 0 Off
RSSI Level for Radio 1 Off
RSSI for Radio 0
RSSI for Radio 1
Function
AP Power/Ready
Status
Indicator
4 Step Progressive Bars
(Red)
25/50/75/100%
4 Step Progressive Bars
(Blue)
25/50/75/100%
Indicator
Off
Blinking
On
Dell PowerConnect W-IAP175 Outdoor Instant Access Point | Installation Guide
Status
RSSI disabled/no signal
Each bar represents a progressive increase in
signal strength, with 4 bars representing
maximum signal strength (100%).
Minimum data rate: One lit LEDs
Maximum data rate: Four lit LEDs
RSSI disabled/no signal
Each bar represents a progressive increase in
signal strength, with 4 bars representing
maximum signal strength (100%).
Minimum data rate: One lit LEDs
Maximum data rate: Four lit LEDs
Status
No power to AP
Device booting, not ready
Device ready