Installing the W-IAP175 on a Pole
1. Attach the W-IAP175 on the mounting bracket using the two M6 x30 bolts (with flat and spring washers) on
each side of the mounting bracket.
Figure 16 Attaching the mounting bracket to the AP
2. Attach the mounting bracket (with W-IAP175) on the pole using four M8 x110 bolts (with flat washers, spring
washers and nuts) and the pair of pole anchors.
Figure 17 Attaching the mounting bracket to the pole
Dell PowerConnect W-IAP175 Outdoor Instant Access Point | Installation Guide
21