Product Specifications - Dell PowerConnect W-IAP175P Installation Manual

Product Specifications

Mechanical
Dimensions (H x W x D)

10.2 inches x 9.4 inches x 4.1 inches

26 cm x 24 cm x 10.5 cm

Weight: 7 lbs/3.25 kg

Shipping Dimensions (H x W x D)

12.9 inches x 12.6 inches x 11.8 inches

33 cm x 32 cm x 30 cm

Shipping Weight: 16.6 lbs/7.5 kg

Temperature

Operating (W-IAP175P): -30ºC to 60ºC (-22ºF to 140ºF)

Operating (W-IAP175AC): -40ºC to 55ºC (-40ºF to 131ºF)

Storage: –40ºC to 70ºC (-40ºF to 158ºF)

Relative Humidity: 5% to 95% non-condensing

Altitude: Up to 9,850ft (3,000 meters)

Mounting: wall or pole mountable

Antennas:

Quad, N-type female interfaces (2 x 2.4 GHz, 2 x 5GHz) for external antenna support (supports MIMO)

Feeder cable may be used for external antenna deployments

Visual Status Indicators (LEDs): See

Electrical
Power In
W-IAP175P: 48-volt DC 802.3at power over Ethernet (PoE+)

W-IAP175AC: 100-240 volt AC from external AC power source

Maximum power consumption: 18 watts (excludes power consumed by any POE device connected to and

powered by the W-IAP175AC)
Power Out
The AC powered model provides an 802.3af POE power source (PSE) on the ethernet interface.

Interfaces
Network:

1 x 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX

Power:

1 x AC power connector (in W-IAP175AC model only)

Antenna:

4 x N-Type female antenna interfaces

Other:

1 x USB console interface

28
Table 3
Dell PowerConnect W-IAP175 Outdoor Instant Access Point | Installation Guide