Wireless Lan - Dell PowerConnect W-IAP175P Installation Manual

Wireless LAN

AP type: Dual-radio, dual-band 802.11n outdoor

Supported frequency bands (country-specific restrictions apply):

2.400 to 2.4835 GHz

5.150 to 5.250 GHz

5.250 to 5.350 GHz

5.470 to 5.725 GHz

5.725 to 5.850 GHz

Available channels: virtual controller-managed, dependent upon configured regulatory domain

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)

802.11n: 2x2 MIMO with two spatial streams

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

Transmit power: Configurable in increments of 0.5 dBm

Maximum transmit power:

2.4 GHz: 25 dBm (limited by local regulatory requirements)

5 GHz: 25 dBm (limited by local regulatory requirements)

Maximum ratio combining (MRC) for improved receiver performance

Association rates (Mbps):

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)

802.11n high-throughput (HT) support: HT 20/40

802.11n packet aggregation: A-MPDU, A-MSDU

Dell PowerConnect W-IAP175 Outdoor Instant Access Point | Installation Guide 29