Wlsxht40Mhzintolerancesta; Wlsxnadhocnetwork; Wlsxnadhocnetworkbridgedetectedap; Wlsxnadhocnetworkbridgedetectedsta - Dell PowerConnect W-IAP175P Reference Manual

wlsxHT40MHzIntoleranceSta

Objects
Status
Description

wlsxNAdhocNetwork

Objects
Status
Description

wlsxNAdhocNetworkBridgeDetectedAP

Objects
Status
Description

wlsxNAdhocNetworkBridgeDetectedSta

Objects
Status
Description

wlsxClientFloodAttack

Objects
Status
Description
94 | Traps
{ wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
wlsxTrapAPChannel,wlsxTrapFrameType,
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation }
current
This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a
Station.
For more info check:http://www.wve.org/entries/show/WVE-2008-0004
{ wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID,
wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress,
wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel }
current
This trap indicates that an AP detected an ad hoc network where a station is connected to an
ad hoc access point.
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr,
wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation,
wlsxTrapAPChannel}
current
This trap indicates that an AP detected an ad hoc network that is bridging to a wired
network.
{ wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID,
wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress,
wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel}
current
This trap indicates that an AP detected an ad hoc network that is bridging to a wired
network.
wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation
current
This trap indicates that the number of potential fake clients detected by
an AP has exceeded the configured IDS threshold. This is the total number of fake clients
observed across all bands.
For more info check:http://www.wve.org/entries/show/WVE-2005-0056
Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide