wlsxDisconnectStationAttackAP
Objects
Status
Description
wlsxDisconnectStationAttackSta
Objects
Status
Description
wlsxSuspectUnsecureAPDetected
Objects
Status
Description
wlsxHT40MHzIntoleranceAP
Objects
Status
Description
Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
{ wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID,
wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress,
wlsxTrapAPRadioNumber, wlsxTrapAPLocation }
current
This trap indicates that an AM detected a station Disconnect attack.
For more info check:http://www.wve.org/entries/show/WVE-2005-0045
http://www.wve.org/entries/show/WVE-2005-0046
http://www.wve.org/entries/show/WVE-2005-0048
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSourceMac,
wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation,
wlsxTrapAPChannel }
current
This trap indicates that an AM detected a station Disconnect attack.
For more info check:http://www.wve.org/entries/show/WVE-2005-0045
http://www.wve.org/entries/show/WVE-2005-0046
http://www.wve.org/entries/show/WVE-2005-0048
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID,
wlsxTrapAPRadioNumber, wlsxTrapMatchedMac, wlsxTrapMatchedIp,
wlsxTrapConfidenceLevel, wlsxTrapAPLocation, wlsxTrapRogueInfoURL }
current
This trap indicates that an access point, classified as Suspected Rogue, has been detected
by a Controller. The AP is suspected to be rogue, with the supplied confidence level, because
it was matched to the wired MAC address.
{ wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
wlsxTrapAPLocation,wlsxTrapAPChannel }
current
This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance
setting.
For more info check:http://www.wve.org/entries/show/WVE-2008-0004
Traps | 93