Identity; Mib Modules; Group; Table - Dell PowerConnect W-IAP175P Reference Manual

Identity

Identity is the opening description of the MIB. The information includes contact information for the vendor and
a general description of the MIB.
aiMIB MODULE-DENTITY
LAST-UPDATED "0804160206Z"

MIB Modules

MIB objects can be placed in logical groups,
group typically contains at least one table. The table lists the MIB objects that contain the information that is
exchanged.
The first object of a table is an Entry. The keyword SEQUENCE lists the objects of the table that contain device
information. Each subsequent object (Informative MIB Object) inherits the OID of the Entry, and contains
information sorted by keywords: Syntax, Access, Status, Description. For details about keywords, see
page 19.
The OID of the Entry is aiAccessPointEntry is aiAccessPointTable 1, which represents
1.3.6.1.4.1.14823.2.3.3.1.2.1.1. The OIDs of the subsequent objects of this table are appended increments of the
Entry OID.

Group

aiStateGroup

Table

aiAccessPointTable
26 | Using MIBs
ORGANIZATION "Aruba Wireless Networks"
CONTACT-INFO
"Postal: 1322 Crossman Avenue
Sunnyvale, CA 94089
E-mail: dl-support@arubanetworks.com
Phone: +1 408 227 4500"
DESCRIPTION
"This MIB is for managing Aruba Instant WLAN"
REVISION "0804160206Z"
DESCRIPTION
"The initial revision."
::= { aiEnterpriseMibModules 1 }
OBJECT-TYPE
SYNTAX SEQUENCE OF AiAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This contains all access points connected to the
virtual controler. This table is empty on AP where
virtual controller is not active"
::= { aiStateGroup 1 }
Group and Table. One MIB file can consist of multiple groups. A
OBJECT IDENTIFIER ::= { aiMIB 2 }
Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
"MIBs" on