wlsxEAPRateAnomaly
Objects
Status
Description
wlsxSignalAnomaly
Objects
Status
Description
wlsxSequenceNumberAnomalyAP
Objects
Status
Description
wlsxSequenceNumberAnomalySta
Objects
Status
Description
86 | Traps
{ wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation,
wlsxTrapAPChannel }
current
This trap indicates that the rate of EAP Handshake packets
received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
For more info check:http://www.wve.org/entries/show/WVE-2005-0049
{wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation,wlsxTrapAPChannel }
current
This trap indicates that an AM detected a Signal Anomaly.
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr,
wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation }
current
This trap indicates that an AM received packets from an AP
which exceeds the acceptable sequence number difference.
The acceptable sequence number difference is an IDS configuration
object.
For more info check:http://www.wve.org/entries/show/WVE-2005-0061
http://www.wve.org/entries/show/WVE-2005-0019
http://www.wve.org/entries/show/WVE-2005-0008
http://www.wve.org/entries/show/WVE-2005-0045
http://www.wve.org/entries/show/WVE-2005-0046
http://www.wve.org/entries/show/WVE-2005-0047
http://www.wve.org/entries/show/WVE-2005-0048
{ wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr,
wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation }
current
The acceptable sequence number difference is an IDS configuration
object.
For more info check:http://www.wve.org/entries/show/WVE-2005-0061
http://www.wve.org/entries/show/WVE-2005-0019
http://www.wve.org/entries/show/WVE-2005-0008
http://www.wve.org/entries/show/WVE-2005-0045
http://www.wve.org/entries/show/WVE-2005-0046
http://www.wve.org/entries/show/WVE-2005-0047
http://www.wve.org/entries/show/WVE-2005-0048
Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide