Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Remove cover upwards in the di-
rection of the arrow
• Insert the SIM card in the opening
with the contact area facing down-
wards and push gently until it en-
gages below the holder (make
sure the angled corner is in the
correct position
Getting started
.
).
• Insert the battery sideways into
the phone
wards
until it engages.
• To remove, press the retaining
tab
then lift the battery out.
• Insert the cover in the lower
edge
, then press downwards
until it engages.
Additional information
Always switch off your phone before re-
moving the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older card.
Functions without SIM card .............p. 115
, then press down-
9