FujiFilm FinePix F40fd Owner's Manual page 84

p-MODE MENU (Playback)
D Press MENU/OK to begin transmission.
When transmission is completed, "DATA
RECEIVED" will appear on the LCD
monitor.
CHECK
You can receive image data by simply pressing buttons
as the order below.
p ➝ p ➝ MENU/OK
84
IR COMMUNICATION IR COMMUNICATION
CONNECTING CONNECTING
CANCEL CANCEL
CAUTION
• Movie images cannot be transmitted.
• If the QUALITY of sending image data is over 3,
QUALITY of the image will be set to 3.
• If "COMMUNICATION ERROR", "CANNOT BE
TRANSMITTED", or "CANNOT BE RECEIVED"
appears, press p or MENU/OK to retransmit the image
data, or press DISP/BACK to cancel transmitting.
• Do not place anything between the transmitting and
receiving device.
• Leaving the camera in direct sunlight or directly under
fluorescent lighting may prevent successful data
transfer.
• Successful transfer may not be possible when
transmitting near infrared transmission devices (such
as the remote controller of TV or VCR) or devices that
generate electrical noise.
• Correctly aim the infrared port towards the front of the
device or camera's infrared port during image data
transmission.
MEMO
When playing back an image received from another
camera, will appear in the LCD monitor.
Setting the menu (➝p.81)