Table of Contents
Advertisement
Installing onto Windows 95
Make sure that the unit is connected to your computer.
1
Turn on the unit, and then turn on your computer.
2
"Update Device Driver Wizard" or "New Hardware Found" window will appear.
If neither of "Update Device Driver Wizard" nor "New Hardware Found" wizard
appear, refer to "Installing through Setup". (See page 36)
If the "Update Device Driver Wizard" window appears, click the
"Next" button and proceed to step 3.
If the "New Hardware Found" window appears, perform the
following steps and proceed to step 6.
Check the radio button for "Driver from disk provided by hardware manufacturer",
1.
and click the "OK" button.
Insert the supplied CD-ROM into your CD-ROM drive.
2.
Type "D:\DRIVERS\MFP-PS\ENGLISH\WIN95", and then click the "OK" button.
3.
(Change "D" to correspond to the letter of your CD-ROM drive.)
The setup program will start to copy the files.
Go to step 6.
Click the "Other Locations" button.
3
Insert the supplied CD-ROM into your CD-ROM drive.
4
INSTALLING THE "AJ-6000 SERIES DRIVER"
29
Advertisement
Table of Contents
