Sharp CS-2635RH Operation Manual page 7

counted as a digit).
"•" : Set this selector to the "•" posi-
tion before starting calculations.
Note: • Be sure to set this selector to
the "•" position after storing an
each rate.
• For the conversion rate and
the tax / discount rate, a single
value can be stored for each.
If you enter a new rate, the
previous rate will be cleared.
CONSTANT / ADD MODE
SELECTOR:
"K" : The following constant functions
will be performed:
Multiplication: The calculator will
automatically
member the first
number entered (the
multiplicand) and
instruction.
Division:
"•":
"A": Use of the Add mode permits
re-
5
The calculator will
automatically
member the second
number entered (the
d i v i s o r )
instruction.
Neutral
addition and subtraction of
numbers without entry of the
decimal point. When the Add
mode is activated, the decimal
point is automatically positioned
according to the decimal selector
setting.
Use of , , and
automatically override the Add
mode and decimally correct
answers will be printed at the
preset decimal position.
re-
a n d
will