Operating Controls - Sharp EL-2910R Operation Manual

OPERATING CONTROLS

ON POWER SWITCH; PRINT / ITEM
OFF P P IC
COUNT MODE SELECTOR:
"OFF": Power OFF
"•": Power ON. Set to the non-print
mode.
"P": Power ON. Set to the print
mode.
"P•IC": Power ON. Set to the print
mode.
Each time
pressed, in the case of
additional and subtraction, or
case of memory calculations,
the associated item counter is
incremented by one. Select the
"P•IC" position to print the
counter values.
• The count is printed when
• Pressing of
Note: The counter has a maximum
or
or is pressed, in the
the calculated result is
obtained.
,
clears the counter.
F 6 3 2 1 0 A
DECIMAL / ADD MODE SELEC-
TOR:
"F":
"6 3 2 1 0": Fixed.
"A":
ROUNDING SELECTOR:
is
" ":
"5/4": An answer is rounded off.
" ":
GT RATE SET
GRAND TOTAL / RATE SETTING
MODE SELECTOR:
"GT": This selector will accumulate the
"•":
"RATE SET": Set the key to position
3
capacity of 3 digits (up to
+999). If the count exceeds the
maximum, the counter will
recount from zero.
Floating.
Add mode.
An answer is rounded up.
An answer is rounded down.
following: (" + " will be printed.)
• Addition and subtraction totals
obtained with .
Neutral, GT OFF.
to enter (or change) the
tax rate.