Location Of Users Control; Control Panel - Sharp LC-13C2H Operation Manual

LOCATION OF USERS CONTROL

Main unit (front view)
Speaker
(Left)

Control panel

HEADPHONE
Headphone
PRESET
1 Press the MENU front of the LCD TV set for
more than two seconds to enter the PRESET
mode.
2 Press the VOL(+)/(–) to start channel search.
(Please see page 15 for details)
Note:
2
label so that the user can easily peel it off after
presetting has been done.
8
VOL CH
PRESET
2
CH ( )/( )
Volume (+)/(–) TV/VIDEO
is attached as a
PRESET 1
To change the vertical angle of the LCD
TV set, tilt the screen up to 5 degrees
forward or 10 degrees backward. The TV
set can also be rotated 40 degrees
horizontally. Please adjust the angle so
that the TV set can be watched most
comfortably.
Speaker (Right)
Table stand
TV/VIDEO MAIN POWER
MENU
POWER
1
MAIN POWER
MENU
Remote sensor
window
Power/Standby indicator
A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).