Basic Operation; Turning On Power; Switching Tv/Video Av1/Av2/Component/Tv Mode - Sharp LC-13C2H Operation Manual

BASIC OPERATION

Turning on POWER

Control section of main unit
MAIN
POWER
Power/Standby indicator

Switching TV/VIDEO AV1/AV2/COMPONENT/TV Mode

POWER
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
TV/VIDEO
VOL
CH
-/--
MPX
1
Press the MAIN POWER switch,
located on the front side of the
main unit to ON.
2
The Power/Standby indicator
instantaneously changes from red
to green and the main unit is turned
on.
Note:
Input mode indication disappears after
several seconds.
1
Turn on the power of the con-
nected video equipment.
2
Press the TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT
or TV mode at the upper right
corner each time TV/VIDEO is
pressed.
Notes:
AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
S-video input terminals is addition-
ally provided for the AV1 input. If
both S-video terminal and normal
video terminals are connected
with cables, the S-video input
terminal is selected as the high
priority.
• AV2: Video equipment connected to the
AV2 input terminals.
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
ON-screen display
AV1 mode
I
6 0 R E M A I N
AV2 mode
I
6 0 R E M A I N
COMPONENT mode
C O M P O N E N T
TV mode
I
6 0 R E M A I N
11