Changing The Channels - Sharp LC-13C2H Operation Manual

Changing the Channels

Changing channels using the CHANNEL SELECT on the remote control
• To handle the increasing number of channels available, this LCD TV set allows you to select up to
100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
CH (
(
CHANNEL
SELECT
-/--
MPX
Changing channels with the CH (
Press the CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .
Press the CH ( ) button and the channels change in the order shown below:
3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .
BASIC OPERATION (Continued)
To select a one-digit channel
(e.g., Channel 5):
1
Press the
2
If "5–" is indicated and the picture
does not change, press the
button to switch over to the 1-digit
select mode and press
)/
)
To select a two-digit channel
(e.g., Channel 15):
1
Press the
-/--
digit select mode.
2
Press the
3
Press the
Note:
Complete this procedure within 4 seconds,
otherwise the selection will not be made.
)/( ) on the remote control.
button.
-/--
again.
button to set the 2-
button.
button.
13