Igr (German Stereo System) Broadcasts - Sharp LC-13C2H Operation Manual

IGR (German stereo system ) BROADCASTS
Enables selection of reception mode when receiving an IGR Stereo signal.
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
Notes:
If approximately 3 seconds pass without a button being pressed, the mode setting is automatically termi-
nated and the TV set returns to normal mode.
The setting can be selected individually for each channel position.
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
24
To let you enjoy IGR broadcasting, this TV receives
IGR system stereo and bilingual broadcasts.
Stereo
TV set is receiving a stereo broadcast.
• Each time you press the MPX button, the mode
switches between STEREO and MONO.
When MONO is selected, the TV sound is output
in monaural.
Bilingual
TV set is receiving a bilingual broadcast.
• Pressing the MPX button changes the audio mode
in the order shown on the right.
MPX
• MAIN=main sound or SUB=sub sound, can be
selected.
If the sound quality is poor due to a weak signal
or other problems during IGR broadcast
reception, set the "OFF" position of the IGR to
change the TV sound to monaural.
1
Press the MENU to display the
</>
MENU screen.
2
Press the ]/[ to select "CH-
SETTING".
MENU
3
Press the </> to display the CH-
]/[
SETTING menu.
4
Press the ]/[ to select "IGR".
5
Press the </> to select "OFF".
When the IGR sound is set to the
"OFF" position, the TV sound is
output in monaural.
Note:
When the IGR sound is set to the "OFF" position, the MPX button cannot be
used to change the audio mode (stereo and bilingual settings).
49
(When stereo
sound is received)
STEREO
49
MONO
(When main
49
sound is received)
MAIN
(When sub
49
sound is received)
SUB
(CH-SETTING menu)
CH-SETTING
RETURN
POSITION [CH15 ]
COLOUR SYSTEM [AUTO ]
SOUND SYSTEM [ I ]
SKIP [OFF ]
FINE [783.25MHz]
NICAM [ON ]
IGR [OFF ]
SELECT: ADJUST: EXIT:
MENU
(When off position is selected)
15
is displayed if IGR is
[
received when IGR is set to
OFF.
[