S-Vhs Et (Expansion Technology) - Sharp VC-S2000HM Operational Manual

BASIC OPERATION
IMMEDIATE RECORDING

S-VHS ET (EXPANSION TECHNOLOGY)

By selecting this function, your VCR will record a virtual S-VHS recording on a standard VHS
format tape. This will help increase picture quality. This function will only work when S-VHS in
the Mode Menu is selected to Auto and the VCR is in SP mode.
• High Grade tapes are highly recommended for Super VHS
• It is recommended that you mark your cassette with Super VHS
in the Super VHS
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR.
3.
To start recording, press
4.
To pause during recording, press
5.
To continue recording, press
6.
To stop recording, press
SIMPLE TIMED RECORDING
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the
VCR.
3.
To start recording, press
4.
To specify a stop time, press
5.
Each additional press of
the stop time by 10 minutes.
6.
To stop recording at any time, press
STOP ( ) once.
NOTES:
• If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into POWERSAVE/STANDBY mode, or just eject the
tape and place the VCR in POWERSAVE/STANDBY timer mode if the VCR is in timer
record mode.
• If the VCR ejects the video tape when you press
protected. i.e. record protection tab has been removed.
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
E E T T
format.
REC ( ).
PAUSE/STILL
REC
(
STOP ( ) once.
REC ( ).
REC (
REC ( ) will delay
or www.sharp.co.uk/support
( ).
).
).
REC
(
13
E E T T
recording.
E E T T
, if it has been recorded
STOP 15:30
) the tape is record