Installing The Server - NEC Express5800/120Rg-2 User Manual

3-6 Setting Up Your Server

INSTALLING THE SERVER

This subsection provides the instructions for the rack-mount server unit into a standard EIA 19-inch
rack cabinet.
Also this subsection describes the removal procedures for the rack-mount server unit from the 19-
inch rack cabinet.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-
3 to 1-8 for details.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Do not use any rack which does not conform to the relevant standard.
Disconnect the power cord(s) before installing or removing the server.
Do not leave more than one device being pulled out from the rack.
Do not lift the server only by a single person.
Always install the server in the specified place.
Do not install the server on the rack leaving the cover removed.
Do not pinch your finger with mechanical components.
WARNING
CAUTION